 |
1. This product has a strong function of cleaning UV ink, non-toxic, tasteless, non-flammable, safe storage.
2. No adverse effects and harm to the ink rollers and PS plate.
3. Concentrated ink cleaning agent cleaning presses and gasoline compared to the same cleaning time and cleaning effect, consumption costs than Gasoline low! And safer!
Use method and technical instructions
1. put the right amount of car wash water in a small plastic bottle, the bottle cap can be drilled a small hole of 0.5 mm in diameter.
2. Check whether the scraper is intact and sharp, if it is broken, it should be replaced.
3. Check whether the ink roller is level, too old should be replaced (otherwise the amount of cleaning agent in the cleaning process will increase).
4. Check whether the rotation roller, PS version, ink roller is completely separated, each separate cleaning to wash fast and clean.
5. Before turning on the machine, spray the car wash water on the ink hopper and rotation roller, will wash the ink roller and then come back to scrub the ink hopper and rotation roller.
Turn on the machine (to the highest speed) and then spray the appropriate amount of ink cleaner on the ink rollers, spray back and forth 2-3 times.
Each spraying interval of 15-20 seconds (large machine time to be longer). After 1-2 minutes of operation, then On the tight ink scraper (this point should be paid special attention to).
6. After tightening the ink scraper, and the ink scraper with a good connection between the ink roller, about 1 minute ink roller on the ink is scraped clean.
If the ink roller is not clean, should continue to add the right amount of ink cleaning agent in the ink roller is not clean, until clean.
7. rubber roller cleaning clean, after the ink roller flush ink scraper will scrape out the milky white liquid in the continued flush until the scraper clean, you can stop, the whole cleaning process takes 4-5 minutes.
Dosage concentration ratio: 1-3%
Package: 18L/Drum
Place of origin: Shanghai
